Filters
Active filters
This vintage lace lightning in Clichy glass is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
We propose a wide range of electrical products and accessories which will allow you to create, restore and customize your lightnings.
All of these electrical products are from modern production, only some can come from antique stock (if so it is written on the product page).
Some items can be technical and hard to understand, if you need help or any advice please feel free to contact us or call us at the shop.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
The china round wire fixation allows you to keep your cable close to a wall or a ceiling.
It can be used as displayed on the picture only with twisted wire.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose a wide range of electrical products and accessories which will allow you to create, restore and customize your lightnings.
All of these electrical products are from modern production, only some can come from antique stock (if so it is written on the product page).
Some items can be technical and hard to understand, if you need help or any advice please feel free to contact us or call us at the shop.
This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
We propose a wide range of electrical products and accessories which will allow you to create, restore and customize your lightnings.
All of these electrical products are from modern production, only some can come from antique stock (if so it is written on the product page).
Some items can be technical and hard to understand, if you need help or any advice please feel free to contact us or call us at the shop.
We propose a wide range of electrical products and accessories which will allow you to create, restore and customize your lightnings.
All of these electrical products are from modern production, only some can come from antique stock (if so it is written on the product page).
Some items can be technical and hard to understand, if you need help or any advice please feel free to contact us or call us at the shop.
We propose a wide range of electrical products and accessories which will allow you to create, restore and customize your lightnings.
All of these electrical products are from modern production, only some can come from antique stock (if so it is written on the product page).
Some items can be technical and hard to understand, if you need help or any advice please feel free to contact us or call us at the shop.
The transparent plastic V wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
The Black plastic V wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
This brass holder holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
This holder is ended by a M10 hole which allows compatibility with all our M10 products in order to link it with a E27 socket.
A standard feature includes:
- 45mm M10 Threaded Hollow Rode
The white plastic V wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
This brass holder holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
This holder is ended by a M10 hole which allows compatibility with all our M10 products in order to link it with a E27 socket.
A standard feature includes:
- 45mm M10 Threaded Hollow Rode
The transparent plastic right angle wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
This brass holder holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
This holder is ended by a M10 hole which allows compatibility with all our M10 products in order to link it with a E27 socket.
A standard feature includes:
- 45mm M10 Threaded Hollow Rode
The black plastic right angle wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
This brass holder holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
This holder is ended by a M10 hole which allows compatibility with all our M10 products in order to link it with a E27 socket.
A standard feature includes:
- 45mm M10 Threaded Hollow Rode