This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning in Clichy glass is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This wall light is "Swan Neck" and Brass Splitter made in China & Brass. This model is really wide and gives a good space from the wall which allows to place three lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 21cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the core of the splitter.

Splitter:

The splitter holds 3 brass sockets with children security complying with CE norms (for inside). These sockets are for E27 lightbulbs.