Filters
This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This lightbulb has the perfect Vintage Look but holds the finest LED Technology.
The old carbon Filaments from Edison were replaced by LED Filaments which lowers the power needed by the lightbulb without changing the Antique look.
The lifetime of the lightbulb is around 20.000h.
Dimensions: 8.2 * 4.6cm
This lightbulb has the perfect Vintage Look but holds the finest LED Technology.
The old carbon Filaments from Edison were replaced by LED Filaments which lowers the power needed by the lightbulb without changing the Antique look.
The lifetime of the lightbulb is around 15.000h.
Dimensions: 14.5 * 6.4 * 6.4cm
This vintage lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1950's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lightning is mounted by us in our workshop, it is inspired by the decors of the 1930's.
Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lightning is mounted by us in our workshop, it is inspired by the interiors of the 1950's.
Complying with CE norms, it has been set up with a E27 metallic socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This vintage lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1950's.
Complying with CE norms, it has been set up with a E27 metallic socket. Sold with 2m of cable and without a lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This modern lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.
Complying with CE norms, it has been set up with a brass fixture and E27 metallic socket. Sold without cable and without lightbulb.
The light through the glass gives a warm feeling and nice drawings on the glass.
Brass Claw:
This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.
It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.
Socket:
One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...
This lightbulb has the perfect Vintage Look but holds the finest LED Technology.
The old carbon Filaments from Edison were replaced by LED Filaments which lowers the power needed by the lightbulb without changing the Antique look.
The lifetime of the lightbulb is around 25.000h.
Dimensions: 7 * 2.5cm
Translucent LED plastic dimmer.
Fitted for:
4-150W filament lightbulbs
11-25W CFL Energy saving lightbulbs
4-25W LED Filament lightbulbs
Easy to place on your electric wire, it complies with CE regulations.
Black LED plastic dimmer.
Fitted for:
4-150W filament lightbulbs
11-25W CFL Energy saving lightbulbs
4-25W LED Filament lightbulbs
Easy to place on your electric wire, it complies with CE regulations.
White plastic led dimmer.
Fitted for:
4-150W filament lightbulbs
11-25W CFL Energy saving lightbulbs
4-25W LED Filament lightbulbs
Easy to place on your electric wire, it complies with CE regulations.
The white plastic V wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
The transparent plastic right angle wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
The black plastic right angle wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
The white plastic right angle wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
The white plastic right wire fixation allows to give the cable a direction. (For ceiling or wall...)
Easy to use, sold with a screw and dowel.
This lightbulb represents the perfect Vintage Look from Edison's light: the Carbon Filament.
The Carbon Filament is strictly regulated in Europe since its power is too high for nowadays standards.
These lightbulbs' lumen have been reduced to - 60 Lumen so it can't be used as first lightning. It must only serve small decoration purposes: lamps, decoration, small light.
The lifetime of the lightbulb is around 2.000h.
Dimensions: 22 * 2.8 * 2.8cm
This lightbulb represents the perfect Vintage Look from Edison's light: the Carbon Filament.
The Carbon Filament is strictly regulated in Europe since its power is too high for nowadays standards.
These lightbulbs' lumen have been reduced to - 60 Lumen so it can't be used as first lightning. It must only serve small decoration purposes: lamps, decoration, small light.
The lifetime of the lightbulb is around 2.000h.
Dimensions: 11 * 4.5 * 4.5cm
This lightbulb represents the perfect Vintage Look from Edison's light: the Carbon Filament.
The Carbon Filament is strictly regulated in Europe since its power is too high for nowadays standards.
These lightbulbs' lumen have been reduced to - 60 Lumen so it can't be used as first lightning. It must only serve small decoration purposes: lamps, decoration, small light.
The lifetime of the lightbulb is around 2.000h.
Dimensions: 12 * 8.5 * 8.5cm
This lightbulb represents the perfect Vintage Look from Edison's light: the Carbon Filament.
The Carbon Filament is strictly regulated in Europe since its power is too high for nowadays standards.
These lightbulbs' lumen have been reduced to - 60 Lumen so it can't be used as first lightning. It must only serve small decoration purposes: lamps, decoration, small light.
The lifetime of the lightbulb is around 2.000h.
Dimensions: 13 * 5.8 * 5.8cm
This lightbulb has the perfect Vintage Look but holds the finest LED Technology.
The old carbon Filaments from Edison were replaced by LED Filaments which lowers the power needed by the lightbulb without changing the Antique look.
The lifetime of the lightbulb is around 15.000h.
Dimensions: 29 * 3.8 * 3.8cm
This lightbulb has the perfect Vintage Look but holds the finest LED Technology.
The old carbon Filaments from Edison were replaced by LED Filaments which lowers the power needed by the lightbulb without changing the Antique look.
The lifetime of the lightbulb is around 20.000h.
Dimensions: 17 * 3 * 3cm
This ceramic ceiling rose is 45mm wide and 35mm high. This one is smaller than the new ones.
This model is made in two parts. This allows to hide "the screw heads".
These roses were made in France in 1960.
This china ceiling rose is 60mm wide and 25mm high. This one is smaller than the new ones.
Nice Art Deco decorations.
These roses were made in France in 1960.
This china ceiling rose is 65mm wide and 25mm high. This one is smaller than the new ones.
Nice Art Deco decorations.
These roses were made in France in 1960.
This china ceiling rose is 65mm wide and 25mm high. This one is smaller than new ones.
Nice Art Deco decorations.
These roses were made in France in 1960.
This china ceiling rose is 65mm wide and 30mm high. This one is smaller than the new ones.
Nice Art Deco decorations.
These roses were made in France in 1960.
This E14 socket is made in brass with two tightening rings.
It's really helpful to hold glass, cage, lamp...
This socket has a cable holder and the children security.
This E14 socket is a classic in electric decoration.
Its simple design and the china make it one of the most used sockets for E14 lightbulbs.
This socket has a cable holder and the children security.
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.
This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...
Basis:
This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.
Neck:
This brass neck is thick and 15cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.
Socket:
China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...
Basis:
This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.
Neck:
This brass neck is thick and 15cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.
Socket:
China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.
This ceramic ceiling rose is 125mm wide with cracks effect.
The kit is composed of: the rose, one metallic plaque that you should fix on your ceiling (or wall) first, then make your connections and easily place the rose and screw it to the metal plaque. This technique makes the fixing of your lights really easy.
These roses are hand made in Italy.
This rose has a wire holder (not seen on the pictures) and has a earth wire if needed.
This E27 socket is mounted with a hook, it is made in black bakelite & white china.
This type of model is perfect to hang many sockets over a bar, a store window and only have one electric cable that powers all the lights.
This socket has the children security.
This E27 socket is made in brass with two tightening rings.
It's really helpful to hold glass, cage, lamp...
This socket has a cable holder and the children security.
This E27 socket is made with a little hanging switch like a Vintage light.
Easy to use and well finished this socket can be used in many lightnings: pendant light, lamp...
This socket has a cable holder and the children security.
This E27 socket is a classic.
Its simple design and the thermic quality of the bakelite.
This socket has a cable holder and the children security.
This E27 socket is a classic.
Its simple design and the thermic quality of the bakelite.
This socket has a cable holder and the children security.
We propose you a wide range of electric cables covered with fabric to customize your decoration through electric creations.
The Vintage touch of these cables will give your lamps and lightnings a genuine feeling.
All our electric cables are manufactured in Europe and comply with the CE norms. It is to be used only inside.