We go everywhere in France to find and buy stocks from antique factories, workshops, stores.

All our Vintage Stocks are genuine antiques and are available in a limited quantity.

Those daily life items will give you a glimpse of the old French history and way of life.

All our articles are sorted out but some may wear some signs of use due to their age.

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning in Clichy glass is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage lace lightning is mounted by us in our workshop, it is inspired by the interiors Art Deco in the 1930's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...