Filters
The Bellini RA4 is a processing kit for color papers.
Allows a fast and high quality homemade process.
It can process about 10m2 of color paper.
With this kit you can make:
Developer (5L)
Bleach (5L)
Fixer (5L)
Stabilizer (20L)
The Bellini Reversal B&W kit is a processing kit for reversal black and white films at 20°C with drums/rotary system. The reversal bath is useful to avoid a second exposure of the film during the process.
Allows a fast and high quality homemade process.
It can process about 10/12 films 135 (36 exp).
With this kit you can make:
First developer (1L)
Bleach (1L)
Clarifier (1L)
Rerversal (1L)
Second developer (1L)
Fixer (1L)
Stabilizer (10L)
The Bellini ECN2 is a processing kit for motion picture color films between 38°C and 41°C for tank or drums/rotary system.
Allows a fast and high quality homemade process.
It can process about 36 films 135 ECN2 (36 exp).
With this kit you can make:
Pre-bath (3L)
Developer (3L)
Stop bath (3L)
Bleach (3L)
Fixer (3L)
Stabilizer (10L)
The Bellini ECN2 is a processing kit for motion picture color films between 38°C and 41°C for tank or drums/rotary system.
Allows a fast and high quality homemade process.
It can process about 12 films 135 (36 exp) or 1 16mm 30,5m film or 6 Super 8 15m films.
With this kit you can make:
Pre-bath (1L)
Developer (1L)
Stop bath (1L)
Bleach (1L)
Fixer (1L)
Stabilizer (10L)
The Bellini E6 is a processing kit for slide color films at 38°C for tank or drums/rotary system.
Allows a fast and high quality homemade process.
It can process about 12 films 135 (36 exp).
With this kit you can make:
First developer (1L)
Reversal bath (1L)
Color developer (1L)
Pre-Bleach (1L)
Bleach (1L)
Fixer (1L)
Stabilizer (10L)
The Bellini C-41 1L is a processing kit for negative color films at 38°C for tank or drums/rotary system.
Allows a fast and high quality homemade process.
It can process about 16 films 135 (24 exp) or 12 films 135 (36 exp).
With this kit you can make:
Developer (1L)
Bleach (1L)
Fixer (1L)
Stabilizer (10L)
The Rollei Colorchem C-41 is a processing kit for negative color films between 25°C, 38°C and 45°C for tank or drums/rotary system.
Allows a fast and high quality homemade process.
It can process about 12 or 16 films in 35mm or 120.
The kit contains:
Color Developer Part A
Color Developer Part B
Color Developer Part C
Bleach Fixer Bath Part A
Bleach Fixer Bath Part B
Stabilizer Bath
The Rollei Colorchem C-41 is a processing kit for negative color films between 25°C, 38°C and 45°C for tank or drums/rotary system.
Allows a fast and high quality homemade process.
It can process about 60 or 80 films in 35mm or 120.
The kit contains:
Color Developer Part A
Color Developer Part B
Color Developer Part C
Bleach Fixer Bath Part A
Bleach Fixer Bath Part B
Stabilizer Bath
The CineStill "Color Simplified Powder Kit" C-41 allows you to process negative color films with 2 simple mixtures.
Easy processing up to 24 rolls.
The kit contains:
CineStill Color Developer powder BATH 1
Cinestill Bleach and Fix powder BATH 2 PART A
Cinestill Bleach and Fix powder BATH 3 PART B
The TCS-1000 is a Temperature Control System by Cinestill to mix, heat and control the temperature of your photgraphy chemistries (C41, E6, BW...)
It heats the temperature of a water volume in which you can place your chemistry jugs and your development tank until it reaches the right temperature to start your process.
Temperature can be set from 0C to 95C.
Really simple to use for those who'd like to start developing color films at home.
It also can be used with powder chemistry since the TCS-1000 mixes it perfectly.
The black ring with the two apertures can hold two accordion bottles 1L.
The inactinic red light allows you to develop papers or films that are orthochromatic as this light can't affect them, so you could work on it safely.
The Bergger Cyanotype kit is a "DIY" sensitive chemistry for blue prints. The 2x300mL solutions allow you to print around 300 papers (8x10" / 20 x 25cm).
The kit contains:
2 x 300 mL (A & B) Emulsion for blue prints
25 Sheets of 100% coton paper (8x10" / 20 x 25cm)
1 Spalter brush 50mm
1 foam brush 50mm
1 mesuring cylinder
1 ceramic bowl
The Paterson kit in an easy-to-use kit for black and white film process.
The kit contains: Paterson tank, two spirals for 35mm, 126, 127, 120 and 220.
For example, you can have two 35mm films in the kit or one 120/220.
The kit also contains: 100mL Adonal developper (anciently Rodinal), 100mL Adofix fixer, 50mL wetting agent, thermometer
The Paterson Large changing bag allows to load the film in complete dark.
Two holes for arms.
Enough space to bring all you need (Tank, Spirals, scissors, films, ...)
This set of 12 contrast filters for enlargers allows you to enhance or reduce the contrast of your RC or FB multigrade papers.
The filters are sold as seen on the picture: without plastic holders or frames.
This big Paterson Tank allows you to process five 35mm films or three 120 films at the same time.
(Can be used with 127, 127, 220, 620...)
Reels aren't included.
The CineStill "Color Simplified Quart Kit" C-41 allows you to process negative color films with 2 simple mixtures.
Easy processing up to 24 rolls.
The kit contains:
Color Developer Part A - 8oz concentrate
Color Developer Part 2 - 2oz concentrate
Color Developer Part 3 - 2oz concentrate
Bleach Fix BLIX Part A - 8oz concentrate
Bleach Fix BLIX Part B - 2oz concentrate
Bleach Fix BLIX Part C - 4oz concentrate
STABILIZER/Final Rinse Bath - 2oz concentrate
The Kodak HC-110 is a black and white film developper.
This developper is highly concentrated so you can have short developing times.
The solution is also "clean" so it won't need too much maintenance for the tank and reels.
This big Paterson Tank allows you to process five 35mm films or three 120 films at the same time.
(Can be used with 127, 127, 220, 620...)
5 reels included.
The Foma R Reversal Kit allows you to process black and white Foma R 100 slide films.
The kit contains all the chemistry (Developpers, Bleach bath, stop bath, fix) to process 8x 135 films, 2x Super8 films and 1x 16mm film.