This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This lightning is manufactured today being inspired by 1930 Hotel lights.

A brass heart divides three E27 nickel sockets allowing to connect three lightbulbs with one electric wire.

Complying with CE norms, the light and simple design and the high quality materials make it an elegant lightning.

Dividing Heart:

This piece is made out of solid nickel. It has four M10 female holes (three for the E27 sockets and one for the cable holder) and one M16 female hole which we filled with a solid nickel M16 button.

It opens in the middle to allow the connections between the three sockets' wires and the arriving wire.

It ends with a nickel cable holder to comply with CE regulations.

Socket:

Three nickel socket with children security complying with CE norms (for inside). These sockets are for E27 lightbulbs.

This lightning is sold without electric wire. You will need to make the connections yourself.

This lightning is manufactured today being inspired by 1930 Hotel lights.

A brass heart divides three E27 brass sockets allowing to connect three lightbulbs with one electric wire.

Complying with CE norms, the light and simple design and the high quality materials make it an elegant lightning.

Dividing Heart:

This piece is made out of solid brass. It has four M10 female holes (three for the E27 sockets and one for the cable holder) and one M16 female hole which we filled with a solid brass M16 button.

It opens in the middle to allow the connections between the three sockets' wires and the arriving wire.

It ends with a brass cable holder to comply with CE regulations.

Socket:

Three Brass socket with children security complying with CE norms (for inside). These sockets are for E27 lightbulbs.

This lightning is sold without electric wire. You will need to make the connections yourself.

This lightning is manufactured today being inspired by 1930 Hotel lights.

A brass heart divides three E27 nickel sockets allowing to connect three lightbulbs with one electric wire.

Complying with CE norms, the light and simple design and the high quality materials make it an elegant lightning.

Dividing Heart:

This piece is made out of solid nickel. It has four M10 female holes (three for the E27 sockets and one for the cable holder) and one M16 female hole which we filled with a solid nickel M16 button.

It opens in the middle to allow the connections between the three sockets' wires and the arriving wire.

It ends with a nickel cable holder to comply with CE regulations.

Socket:

Three nickel socket with children security complying with CE norms (for inside). These sockets are for E27 lightbulbs.

This lightning is sold without electric wire. You will need to make the connections yourself.

This lightning is manufactured today being inspired by 1930 Hotel lights.

A brass heart divides three E27 brass sockets allowing to connect three lightbulbs with one electric wire.

Complying with CE norms, the light and simple design and the high quality materials make it an elegant lightning.

Dividing Heart:

This piece is made out of solid brass. It has four M10 female holes (three for the E27 sockets and one for the cable holder) and one M16 female hole which we filled with a solid brass M16 button.

It opens in the middle to allow the connections between the three sockets' wires and the arriving wire.

It ends with a brass cable holder to comply with CE regulations.

Socket:

Three Brass socket with children security complying with CE norms (for inside). These sockets are for E27 lightbulbs.

This lightning is sold without electric wire. You will need to make the connections yourself.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 10cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 10cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 15cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 15cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 20,5cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 20,5cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 10,5cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 10,5cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 10cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 10cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 7cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is a nice "Swan Neck" made in China & Brass. This model is really wide and gives a good space from the wall which allows to place big lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 7cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the socket.

Socket:

China socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

This wall light is "Swan Neck" and Brass Splitter made in China & Brass. This model is really wide and gives a good space from the wall which allows to place three lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 21cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the core of the splitter.

Splitter:

The splitter holds 3 brass sockets with children security complying with CE norms (for inside). These sockets are for E27 lightbulbs.

This ceramic ceiling rose is 125mm wide with cracks effect.

The kit is composed of: the rose, one metallic plaque that you should fix on your ceiling (or wall) first, then make your connections and easily place the rose and screw it to the metal plaque. This technique makes the fixing of your lights really easy.

These roses are hand made in Italy.

This rose has a wire holder (not seen on the pictures) and has a earth wire if needed.

This ceramic ceiling rose is 125mm wide with blue decors on the side.

The kit is composed of: the rose, one metallic plaque that you should fix on your ceiling (or wall) first, then make your connections and easily place the rose and screw it to the metal plaque. This technique makes the fixing of your lights really easy.

These roses are hand made and hand painted in Italy.

This rose has a wire holder (not seen on the pictures) and has a earth wire if needed.

This ceramic ceiling rose is 125mm wide with red decors on the side.

The kit is composed of: the rose, one metallic plaque that you should fix on your ceiling (or wall) first, then make your connections and easily place the rose and screw it to the metal plaque. This technique makes the fixing of your lights really easy.

These roses are hand made and hand painted in Italy.

This rose has a wire holder (not seen on the pictures) and has a earth wire if needed.