We go everywhere in France to find and buy stocks from antique factories, workshops, stores.

All our Vintage Stocks are genuine antiques and are available in a limited quantity.

Those daily life items will give you a glimpse of the old French history and way of life.

All our articles are sorted out but some may wear some signs of use due to their age.

Here comes back the famous slide film from Kodak.

The Ektachrome E100 is a warm low speed slide film with ultra fine grain (T-grain), giving brighter white and high contrast.

Recommended for portrait as there's a great fidelity in skin tones but also ideal for landscape or street photography.

The Kodak Ektachrome 100D is a classic color slide film with unique cinema colors and ultra fine grain.

Manufactured for 16mm movie cameras, it should be developed with E6 process. 

It can be used at 100 ISO (Daylight) or 25 ISO (Tungsten with 80A filter)

This modern opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This modern opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This modern opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This modern opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

The Kodak Portra 160 is a professional film with fine grain.

It is well known for its color that matches perfectly the natural ones especially for the skin tone.

This film is the one with the lowest sensitivity within the Kodak Portra films.

10 Sheets of 8 x 10 Inch films for plates camera.

We hunt for you Vintage films to give you a chance to shoot disappeared films.

We don't know how these films were stored so we can't give you any guarantee.

This modern opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E14 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E14 lightbulbs.

Please note this lightning is sold without electric wire, without E14 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E14 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E14 lightbulbs.

Please note this lightning is sold without electric wire, without E14 lighbulb and without domino / ceiling rose / plug in...

The Kodak Verichrome Pan is a panchromatic film that replaced the Verichrome (orthochromatic).

This one was designed for Cirkut Camera, a rotative panoramic camera.

We hunt for you Vintage films to give you a chance to shoot disappeared films.

We don't know how these films were stored so we can't give you any guarantee.

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E14 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E14 lightbulbs.

Please note this lightning is sold without electric wire, without E14 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage opaline lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

This vintage tulip lightning is mounted by us in our workshop, it is inspired by the interiors Art Nouveau in the 1900's.

Complying with CE norms, it has been set up with a E27 socket. Sold without cable and without lightbulb.

The light through the glass gives a warm feeling and nice drawings on the glass.

Brass Claw:

This claw holds the glass shade thanks to 3 brass screws, if your remove it to change the lightbulb be careful when screwing back: do it with balance to be sure it holds safely the glass shade and do not turn too hard not to break the glass.

It ends with a brass cable holder to comply with CE regulations. To make it safe make a loop with the wire around the brass loop.

Socket:

One socket with children security complying with CE norms (for inside). This socket is for E27 lightbulbs.

Please note this lightning is sold without electric wire, without E27 lighbulb and without domino / ceiling rose / plug in...

The Paterson kit in an easy-to-use kit for color, black & white and slide film process.

The kit contains: Jobo tank 1540, 2 reels, 2 scaled bottles (1000 ml), 2 sets of film clips, 1 thermometer, 2 graduates (260ml and 20ml), 1 Jobo cascade and 1 roller base.

The Polaroid Now is a great balance between modern and vintage style of a polaroid.

With 16 films (x1 double pack) included in the set, It makes the perfect combo to get started in instant photography !

High quality lens, incorporated flash, self-timer, flash, battery included so it can be powered with USB-C.

The I-Type film doesn't need a battery  (which lowers the price per pack of film).

The camera accepts both I-Type and 600 Films.

The Polaroid Now is a great balance between modern and vintage style of a polaroid.

With 16 films (x1 double pack) included in the set, It makes the perfect combo to get started in instant photography !

High quality lens, incorporated flash, self-timer, flash, battery included so it can be powered with USB-C.

The I-Type film doesn't need a battery  (which lowers the price per pack of film).

The camera accepts both I-Type and 600 Films.

The Polaroid Go is the latest camera produced by Polaroid. It is the smallest instant film camera available on the market!

High quality lens, self-timer, flash, battery powered by USB, double exposure mode...

The Polaroid Go needs a new format of Instant Films: The Go Films which are smaller than the traditionnal Polaroid 600, SX-70 or I-Type...

Foma is well-known for its black and white photographic products.

Here is one of its most famous Photo Paper: The Fomabrom 111 Variant Glossy.

This fiber based black and white paper (285grs) is manufactured to make analog prints with an enlarger.

It has a Variable Contrast. Its tone is neutral.

Please note: Yellow / Green safe lights are not allowed for this paper.

The Black and White Analog Printing Workshop is a Photography workshop to experience the traditionnal analog printing.

Through this workshop you will discover how to print your black & white film in the darkroom.

This workshop is composed of a party of 3 to 5 participants led by a Professor who will help student from a beginner to a medium level to improve their printing skills in the darkroom.

This session is dedicated to the 35mm format. All the supplies needed for the day are included in the price: photo papers RC, paper chemistries and all the equipments and accessories needed.

You need to come with your own personal 35mm black and  white film already developed, it needs to be well exposed and well developed.

- 14h00: The day will start with the discovery of the laboratory and the darkroom. The Professor will introduce the making of a traditionnal contact sheet, so each student can perform it by its own. This contact sheet will show you for the first time your pictures from the film you brought. You will then choose one picture and experiment enlarging it on RC paper (format 18*24cm). You will discover the magic of the darkroom with your own image appearing in front of your eyes.

The day will end around 18h00, you should have discovered by now the magic of printing in the darkroom.

The price is per person, VAT included. If you want to come on a workshop with someone else you can book on the same order 2 places and communicate the names of the participants.

We can also host groups for companies, bachelor parties, birthdays or any events... For these private events a date will be booked previously with us, please contact us via mail: [email protected]

If you have any questions or want to discover the lab prior to book a session you can come any time check it out and ask for a lab tour, our address is 13, rue de la Bombarde 69005 Lyon France.

Anyone who received a Gift Voucher for this workshop can contact us to be part of the date announced or to know the future dates.

This wall light is "Swan Neck" and Brass Splitter made in China & Brass. This model is really wide and gives a good space from the wall which allows to place three lightbulbs...

Basis:

This china ceiling rose is 105mm wide with three fixing points and 2 thread passages on the side.

Neck:

This brass neck is thick and 21cm long, it is linked to the rose and socket thanks to M10 tubes. All the threads can go inside (twisted or round). Please note that you will need around 40cm of wire to connect your wall light from the basis to the core of the splitter.

Splitter:

The splitter holds 3 brass sockets with children security complying with CE norms (for inside). These sockets are for E27 lightbulbs.